The Epson SureColor G6070 brought Epson quality and real support to DTF, and shops love it for that. But for a lot of shops, the G6070 was never even an option. It just wasn’t fast enough, and it wasn’t built for industrial production.
Epson heard that feedback. Enter the G9070.
This is not just a bigger G6070. Epson kept the DNA that made the G6070 a hit, then re-engineered everything that matters when you’re printing real volume. In this blog, we break down exactly what’s the same between these two machines — and exactly what Epson changed to build a true production DTF printer. By the end, you’ll know if you should be looking at the G6070, the G9070, or both.
Watch: Andy Breaks Down the G6070 vs G9070
First, the G6070
The G6070 has been shipping for about a year and a half now, and in that time it’s earned its reputation. This is a tried-and-true machine. Thousands of shops are running them every day, getting Epson print quality, with real on-site support behind them if anything goes wrong.
It’s a 35.4-inch roll-to-roll printer, built for light to moderate DTF volume. It runs one roll at a time, prints up to 85 square feet per hour in Speed Mode with color plus white, and its front-loading design lets it sit against a wall instead of taking over your floor. Maintenance is mostly automatic, taking just a few minutes a week.
If you’re getting into DTF, or you’re running light to moderate volume, the G6070 is still the right call. It’s proven, it’s affordable, it plugs into a standard wall outlet, and it delivers that Epson quality and support. It’s a fantastic printer, and it’s not going anywhere.
Epson didn’t build the G9070 to replace it. They built the G9070 to answer a different question.

Then, the G9070
What does a customer need when DTF isn’t their part-time job — when it’s the whole operation, running all day, every day?
That’s the G9070. A 64-inch production printer, built for shops that never stop.
It can print two rolls at once across that 64-inch width. It reaches up to 350 square feet per hour in DTF Normal Mode with color plus white, and up to 650 square feet per hour in single-layer mode. And the printhead is user-replaceable, so a head swap doesn’t mean waiting on a service technician.
This is the machine for high-volume apparel decorators, contract DTF print providers, and shops running multiple shifts or around-the-clock production. When your orders are stacked up and every hour of uptime matters, this is the printer Epson built for that job.

What’s the Same
This is the part that should make G6070 fans feel right at home.
The ink is identical. Both printers run the exact same Epson UltraChrome DF ink — same formulation, same 1.6-liter sealed packs, same part numbers. It’s the same OEKO-TEX certified, safe-for-apparel ink you already trust, so the quality and the chemistry carry right over. Ink pricing is the same too, with one asterisk for the highest-volume shops. We’ll come back to that.
The software is the same. Both come with two RIPs: Fiery Digital Factory and Epson Edge Print Pro. You get two solid options to drive the printer right out of the box. If you’re running real volume, Digital Factory is probably the better fit. It brings the production tools high-output shops lean on — a gang sheet builder that auto-nests your designs to pack the most onto every inch of film, advanced white ink handling, and multi-lane printing so you can run multiple jobs side by side.
The maintenance is the same. When a printer gets labeled “industrial,” that usually means more manual upkeep, more technical know-how, and more of your day spent babysitting the machine. Not here. Epson carried every one of the G6070’s automated maintenance features straight into the G9070. Both have the automatic fabric wiper. Both circulate the white ink automatically so it doesn’t settle. And both use Nozzle Verification to catch a clogged nozzle and print around it, before it ever shows up as banding on your film. Even though the G9070 is a true production machine, it maintains itself like the G6070 Epson built for the entry-level user.
The support is the same — and it matters more at this level. Think about the DTF market for a second. It’s been dominated by generic, overseas machines where “support” means a YouTube video and a WhatsApp number in a different time zone. If your printer goes down, you’re the technician. Epson does it completely differently. Both the G6070 and the G9070 come with real, on-site service. An Epson-trained technician comes to you, and you can lock that in for up to five years.
A hobbyist or a small shop might be able to limp along for a few days waiting on support or parts. It’s painful, but they’ll survive. A high-volume shop can’t. When you’ve got customer orders stacked up and deadlines you’ve committed to, a printer sitting dead on the floor isn’t an inconvenience. It’s missed SLAs, angry customers, and lost accounts. The bigger your operation, the more that on-site guarantee is worth.
Same ink, same software, same self-maintenance, same on-site support. That’s the foundation both machines are built on.
What Epson Changed for Production
Epson didn’t sit down to reinvent DTF printing. Epson has been building high-production printers for other markets for years. So with the G9070, they asked a simple question: what features do we need to incorporate to make this a true production printer? Every difference below is an answer to that question. Bigger, faster, tougher, built to run all day.
A bigger printhead. Epson stepped up to a larger, 2.6-inch printhead that lays down more ink on every single pass, giving you vibrant ink density at speed. Other DTF printers chase speed a different way — they gang up two, four, or even more small Epson printheads. That works on a spec sheet, but keeping all those heads in perfect alignment is a constant battle, which is why so many high-speed DTF printers are always fighting banding. The G9070 does it with one extra-large head that’s exclusive to Epson.
A printhead you can swap yourself. On most printers — the G6070 included — if the head fails, you’re waiting on a service call, or you’re tearing the machine apart to try to replace the head yourself. On the G9070, you can swap the head yourself, right there on the floor, in under an hour, with no special tools. No waiting. No lost days. A few minutes of work and you’re back to printing.
Real-world speed. On paper, the G9070 is rated about twice as fast as the G6070. But spec sheets don’t tell the real story. In actual production, running the modes shops really use, the G9070 is roughly three to five times faster than the G6070. Epson has the largest printhead in the DTF market, allowing them to produce the cleanest and fastest prints at exceptional quality.
Width that gives you options. The G6070 is a 36-inch printer. The G9070 nearly doubles that to a full 64 inches, and that opens up a world of flexibility. Sixty-four inches doesn’t mean you have to print wider rolls. It’s about what that width lets you do for your specific workflow. Run a single narrow roll. Load a wider roll to fit bigger designs or gang more work across the film. Or load two rolls at the same time, side by side. The G9070 lets you design the workflow that is best for you, instead of working around the limitations of other DTF printers.
Longer runs, fewer roll changes. That width also buys you run time. The G6070 loads rolls up to about 400 feet. The G9070 runs rolls nearly twice as wide and twice as long, for roughly four times more film overall. More film on the roll means fewer roll changes, longer unattended runs, and more hours where the machine is printing instead of waiting on an operator. In a production environment, that’s exactly what you want.
A body built to run around the clock. All that production capability has to live in a body that can handle it. The G6070 is a compact, 295-pound machine that plugs into a standard wall outlet. The G9070 is a different animal: 815 pounds of industrial chassis, built on the same platform Epson uses for its high-volume signage printers, running on a dedicated 220-volt circuit. Why 220? Heat. Laying down this much ink this fast takes serious, stable heat to set it on the film — more than a standard 110-volt outlet can deliver hour after hour. That 220-volt power lets the G9070 come up to temperature fast and hold it steady through all-day production.
Ink pricing at scale. The ink itself is identical between the two machines. But for high-volume G9070 shops, Epson has developed a pallet-level ink program with more aggressive pricing at scale. If that’s you, reach out to us at ITSupplies.com and we’ll walk you through the program. Epson makes more ink than just about anyone in the world, and they didn’t build an industrial printer this good just to lose out to inferior machines boasting bargain ink prices.
G6070 vs G9070 at a Glance
| Feature | Epson SureColor G6070 | Epson SureColor G9070 |
|---|---|---|
| Max print width | Up to 35.4 inches, single roll | Up to 64 inches, twin-roll support |
| Production level | Entry to mid-volume DTF production | High-volume, production-class DTF |
| Print speed, color + white | Up to 85 sq ft/hr, Speed Mode | Up to 350 sq ft/hr, DTF Normal Mode |
| Printhead | PrecisionCore Micro TFP, nozzle verification | User-replaceable PrecisionCore Micro TFP, nozzle verification |
| Ink | Epson UltraChrome DF, 1.6L sealed packs | Epson UltraChrome DF, 1.6L sealed packs |
| Software | Fiery Digital Factory, Epson Edge Print Pro | Fiery Digital Factory, Epson Edge Print Pro |
| Size and weight | 64 in. wide, 295 lb | 116 in. wide, 815 lb |
| Power | Standard wall outlet | Dedicated 220-volt circuit |
| Regular price | $14,995 | $24,995 |
Check the product page for current pricing and promotions, or call 1-800-771-9665 for a quote. As of November 2026, the G6070 is $13,995 after Epson’s $1,000 Instant Rebate, and the G9070 is $19,995 after Epson’s $5,000 Instant Rebate, both through 11/30/2026.
Which One Belongs in Your Shop?
If you’re getting into DTF, or running light to moderate volume, the G6070 is still the right call. It’s proven, it’s affordable, it plugs into the wall, and it delivers Epson quality and support. It’s a fantastic printer, and it’s not going anywhere.
If DTF is your business — if you’re running production volume, you’ve got orders stacked up, and every hour of uptime matters — the G9070 is built for exactly that. It’s faster, it holds more film, it runs all day, and you can swap the head yourself if you ever need to.
If you’re somewhere in the middle? That’s probably a more nuanced conversation. Give us a call. That’s what we’re here for.
The Bottom Line
Same DNA, two very different machines. The G6070 is the proven, affordable way into Epson DTF. The G9070 takes everything shops loved about the G6070 — the ink, the quality, the self-maintenance, the on-site support — and rebuilds the rest for all-day, high-volume production.
If you’re trying to figure out which one fits your shop, that’s exactly what we do at IT Supplies. Reach out at hello@itsupplies.com and let’s talk it through, print some samples, and maybe even host you for a demo!
Browse Epson DTF printers: itsupplies.com/epson-direct-to-film-printers
