Roland TY-300 30” DTF Printer Walkthrough

Why the Roland TY-300 Matters

The direct-to-film (DTF) printing space is booming, and for good reason. DTF technology gives decorators the flexibility to print full-color transfers and apply them to a wide range of garments with minimal setup. But here’s the catch: not every printer is built to handle high-volume production.

That’s where the Roland TY-300 comes in. This 30-inch wide-format DTF printer is designed for print shops that have outgrown smaller desktop models like the Roland BY-20 and need to scale up without sacrificing quality.

Compared to its 20-inch sibling, the TY-300 offers:

Wider media support (30”) for larger designs and higher throughput.
Production speeds up to 246 sqft/hr in certain modes.
Integrated automation options that cut down on manual steps.

In short, the Roland TY-300 bridges the gap between entry-level DTF printers and full-on industrial systems.

Deep Dive: Features That Set the TY-300 Apart

The TY-300 isn’t just an upgrade in size; it’s a purpose-built solution for serious DTF printing. Let’s break it down by component:

1. The Printer Engine

At its core, the TY-300 uses piezo printhead technology capable of resolutions up to 1200 DPI. That means fine details, smooth gradients, and vibrant prints that pop on fabric.

Speed options: Up to 246 sqft/hr in 3-pass mode (though most shops will run slower for premium adhesion and detail).
Dryers and servo motor upgrades: Dual onboard dryers and an upgraded digital servo motor keep prints stable even at higher speeds.
Balance of speed vs. quality: Even in high-quality modes, the TY-300 clocks over 52 sqft/hr — impressive for a DTF unit.

2. Roland S-PG2 Inks

Roland formulated S-PG2 inks specifically for this printer, and they check all the boxes:

Oeko-Tex® Eco Passport certified for safety and compliance.
Bright, vibrant colors that hold up on dark and light garments.
Optimized for efficiency to keep ink costs manageable.

Inks aren’t just about color; they’re the lifeblood of your profitability. With Roland’s lineup, you’re not only producing vivid transfers, but you’re also ensuring consistency from print to print.

3. DTF Film Rolls

The TY-300 pairs perfectly with Roland’s Cold Peel DTF Film. Each roll is a massive 328 feet, so you’re not constantly stopping production to reload. And since the film is engineered to accept Roland inks, the transfers come out crisp and reliable every time.

4. Automation with the RDTFS800

Here’s where the TY-300 really flexes. The RDTFS800 system bundles with the printer and automates the final three steps of the DTF process:

Applying adhesive powder.
Shaking off excess.
Curing the powder for pressing.

Instead of manually powdering and curing with a heat press, which is messy, inconsistent, and time-consuming, the RDTFS800 does it all in one smooth workflow. Key perks include:

Dual catch tray for longer runs.
Built-in fume extractor for a safer shop environment.
Space-saving design that integrates with the printer.

Automation here isn’t just a convenience; it’s a productivity multiplier.

5. Software & Maintenance Tools

Roland ships the TY-300 with a full suite of software:

VersaWorks 7 for RIP control.
FlexiDesigner for design flexibility.
DG Connect for job tracking and maintenance monitoring.

Daily upkeep is simplified with:

Automatic wiping system to keep printheads clean.
User-replaceable parts for cost-effective maintenance.

Add Roland’s 1-year warranty (extendable up to 3 years), and you’ve got both peace of mind and long-term reliability.

Roland TY-300 vs. Roland BY-20

If you’ve been using the Roland BY-20, the compact 20-inch desktop DTF printer, you’re familiar with its power for smaller runs. But growth often brings new challenges.

Feature	Roland BY-20	Roland TY-300
Print Width	20 inches	30 inches
Productivity	Desktop Scale	Production Scale
Speed	Good for Small Batches	Up to 246 sqft/hr
Workflow	Mostly Manual	Fully Automated with RDTFS800
Best For	Startups, Hobbyists	Growing Businesses, High-Volume Shops

Simply put: the BY-20 is perfect for getting started, but the TY-300 is designed for when you’re ready to run a business, not just a printer.

Who the Roland TY-300 Is Built For

The TY-300 is a smart fit for:

Growing print shops moving from entry-level to production-scale.
Apparel decorators handling bulk orders with quick turnaround needs.
Businesses adding DTF as a revenue stream alongside DTG, sublimation, or screen printing.

If you’re tired of bottlenecks from manual powdering, limited print width, or slower speeds, this machine is built to take that pain away.

Why Buy the Roland TY-300 from IT Supplies?

Let’s be real, buying a printer is more than a transaction. It’s an investment in your business, and who you buy from matters. At IT Supplies, you’re not just getting a box shipped to your door. You’re getting:

Expert guidance on choosing the right printer and supplies.
Hands-on support during setup and operation.
Long-term partnership, even past warranty coverage.

As Kevin said in our Roland TY-300 Walkthrough on YouTube: “We don’t just sell you a printer and say buh-bye. We’re committed to your success.”

That’s the difference between buying gear and building a business.

FAQs About the Roland TY-300

1. How fast can the Roland TY-300 really print?

In 3-pass mode, it can hit up to 246 sqft/hr, but most shops will run slower for better adhesion. Even in high-quality modes, it still pushes over 52 sqft/hr.

2. Is the TY-300 difficult to maintain?

Not at all. Automatic wiping and user-replaceable parts make upkeep straightforward. Plus, DG Connect helps you track maintenance.

3. Do I need the RDTFS800 system?

Technically, no — you can manually powder and cure prints. But if you’re running high volume, the RDTFS800 saves time, space, and labor, making it almost essential for scaling.

4. What’s the warranty?

It comes standard with a 1-year warranty, extendable to 3 years for added peace of mind.

5. Who should choose the TY-300 over the BY-20?

If you’re producing in bulk or need automation, the TY-300 is your machine. If you’re just starting out with small runs, the BY-20 may be enough.

Wrapping It Up

The Roland TY-300 30” DTF printer isn’t just a bigger version of the BY-20; it’s a purpose-built production machine. With wider format capability, faster speeds, and a fully automated workflow, it’s designed for shops that are serious about scaling.

Pair that with Roland’s trusted software, ink technology, and IT Supplies’ unbeatable support, and you’ve got a long-term investment that can transform your business.

👉 Ready to see what the TY-300 can do for your shop?
Check out our full lineup of Roland Direct-to-Film Printers here and take your printing to the next level.

IT Supplies is your one-stop shop for everything you need to achieve the perfect print. We partner with top manufacturers to bring you the best in printing technology, including Eco-Solvent, Latex, UV, and Aqueous printers from EPSON, HP, and Canon. Our lineup also features a wide selection of Dye-Sublimation, DTF, and DTG printers from EPSON and HP. Explore our full range at www.itsupplies.com or by giving us a call at 1-800-771-9665!